On Friday, November 13, 2026, the Federal Aviation Administration (FAA) did something it almost never does: it issued a nationwide ground stop, ordering every departing flight in the United States to stay on the ground for more than four hours. The shutdown was triggered not by weather or a security threat, but by a single faulty network router in rural Arkansas. It canceled more than 7,000 flights and stranded hundreds of thousands of travelers before the agency lifted the order at 8:15 p.m. Eastern time.
For many passengers, the disruption raised a simple question: What exactly is a ground stop, why did a computer problem in one small town halt the country's entire air traffic system, and are flights still grounded now? Here is how ground stops work, what went wrong on November 13, and what happens next.
What Is the FAA, and What Is a Ground Stop?
The Federal Aviation Administration is the U.S. government agency responsible for regulating and overseeing civil aviation, from certifying pilots and aircraft to operating the air traffic control system that guides planes through the National Airspace System. When that system becomes unsafe or overloaded, the FAA can use a tool called a ground stop to slow things down.
A ground stop is an air traffic control measure that halts the flow of aircraft meeting certain criteria, requiring those planes to remain on the ground rather than take off. In simple terms, controllers stop departures, sometimes for a single airport, sometimes for an entire region, and, in rare cases, for the whole country.
Ground stops override all other traffic management initiatives, and aircraft are not released until controllers lift the order. Planes that are already airborne are generally allowed to continue to their destinations, though some may be diverted or asked to hold in the air if their arrival airport cannot accept them. The goal is to prevent extended airborne holding, sector or center saturation, and airport gridlock, in other words, to keep a localized problem from rippling across the entire system.
Timeline: How the November 13 Shutdown Unfolded
Here is how the rare nationwide stop played out:
- About 3:30 p.m. ET (20:54 UTC): The FAA says it experienced a technical problem after data began flooding its network, and it issued a nationwide ground stop out of an abundance of caution to keep aircraft operating safely.
- Shortly after: Transportation Secretary Sean Duffy confirmed on social media that the FAA had stopped all U.S. airport departures following communication issues affecting air traffic control centers nationwide.
- Over the next several hours: Departures were halted across the country while technicians worked to stabilize the system. More than 7,000 flights were ultimately canceled.
- 8:15 p.m. ET: The FAA lifted the ground stop, more than four and a half hours after it began, and departures started resuming.
- Overnight and the next day: More than 8,000 flight operations resumed, but ripple-effect delays and cancellations continued as airlines repositioned crews and aircraft.
What Actually Caused the Shutdown?
The FAA's initial investigation points to two locations: a radio site in El Dorado, Arkansas, and a radar facility near Amarillo, Texas. At the El Dorado site, technicians had recently installed a new router made by the aerospace and defense contractor L3Harris as part of an upgrade moving the facility from copper wiring to fiber optic cable.
Shortly after installation, that router began flooding the FAA's telecommunications network with excessive data, at a rate of roughly 1,000 connection attempts every four to five seconds, according to the agency. The FAA's legacy equipment became unstable, and communications were disrupted across a majority of the nation's en-route air traffic control centers. A second router at the Texas site is also under scrutiny.
"When we shut down this El Dorado, Arkansas, facility, the system stabilized," FAA officials said in a briefing, pointing to the Arkansas router as the center of the investigation.
Transportation Secretary Sean Duffy said the failure involved work to transition a remote facility from copper to fiber optic cable, which caused a router to overload. "A contractor or piece of equipment didn't meet the moment," Duffy said, adding that officials still do not know exactly why the router failed.
Why the Outage Matters: An Aging System Under Strain
The November 13 stop was disruptive on its own, but it also exposed a deeper problem: the air traffic control system's aging infrastructure. President Donald Trump described the cause as "old equipment that had a heart attack," while Duffy acknowledged the system had been underfunded and under-modernized before his tenure.
The scale of the disruption was significant. More than 7,000 flights were canceled on Friday, and hundreds of thousands of passengers were left stranded as the stop stretched into the evening, when major hubs are typically at their busiest. Because airlines operate on tight schedules, a four-hour nationwide halt creates a cascade: planes and crews out of position, missed connections, and delays that can take days to fully clear.
The FAA and the FBI are both investigating the incident, and the Department of Transportation has disabled the potentially faulty router. The episode has drawn comparisons to past system failures, including the January 2023 outage of the FAA's NOTAM system, which also triggered a nationwide ground stop, a reminder that a single point of failure can briefly bring U.S. aviation to a standstill.
Are Flights Still Grounded? The Current Status
No. The nationwide ground stop was lifted at 8:15 p.m. ET on Friday, November 13, and flights have resumed across the country. The FAA said the system was made stable and air traffic operations restarted that evening, with more than 8,000 flight operations resuming overnight.
That said, travelers felt the effects for days. Because so many aircraft and crews were left out of position, airlines continued to work through cancellations and delays into the weekend and beyond. Passengers with upcoming flights were advised to check directly with their airline, since individual delays can persist even after a system-wide order ends.
What Happens Next: Modernization and a $50 Billion Question
In the days after the stop, Duffy pledged to modernize the country's air traffic control system and build new architecture to prevent a repeat, and he put a price tag on it. Duffy asked Congress for roughly $50 billion for air traffic control modernization, a marked increase over past funding levels, describing it as a necessary investment in a system that has been underfunded for years.
"I take responsibility for what was given to me by prior administrations," Duffy told CNN, while also vowing to find out exactly how a single router upgrade could halt the entire network. Investigators are now examining the L3Harris routers, the upgrade process, and whether proper safeguards and testing were in place before the equipment went live.
The outcome of that investigation will help determine whether the fix is a simple procedural change or a more fundamental overhaul. Either way, the November 13 ground stop has become one of the clearest examples yet of how fragile the nation's air traffic control backbone can be, and how quickly a problem in one small Arkansas town can ripple across the entire country.
The Bottom Line: Key Takeaways
- A ground stop is an air traffic control order that keeps planes from taking off, and on November 13, 2026, the FAA issued one for the entire United States.
- The stop began around 3:30 p.m. ET and was lifted at 8:15 p.m. ET, lasting more than four and a half hours.
- A newly installed L3Harris router at a radio site in El Dorado, Arkansas, flooded the FAA's network with data, disrupting air traffic control centers nationwide; a Texas site is also under scrutiny.
- More than 7,000 flights were canceled and hundreds of thousands of travelers were stranded, with delays rippling for days afterward.
- Flights have resumed, but the FAA and FBI are investigating, and Transportation Secretary Sean Duffy has asked Congress for about $50 billion to modernize air traffic control.


